ergomach

Ergonomics and design, ordering and using of Machinery

Standardization

The family of harmonised standards developed by CEN TC 122 – Ergonomics to support the Machinery Directive’s application

Table prepared on the basis of the information provided on the CEN website:

Standard reference Title Citation in OJ
EN 1005-1:2001 + A1:2008 Safety of machinery – Human physical performance – Part 1: Terms and definitions C 74 (2009-03-28);C 214 (2009-09-08)
EN 1005-2:2003 + A1:2008 Safety of machinery – Human physical performance – Part 2: Manual handling of machinery and component parts of machinery C 74 (2009-03-28);C 214 (2009-09-08)
EN 1005-3:2002 + A1:2008 Safety of machinery – Human physical performance – Part 3: Recommended force limits for machinery operation C 74 (2009-03-28);C 214 (2009-09-08)
EN 1005-4:2005 + A1:2008 Safety of machinery – Human physical performance – Part 4: Evaluation of working postures and movements in relation to machinery C 74 (2009-03-28);C 214 (2009-09-08)
EN 547-1:1996 + A1:2008 Safety of machinery – Human body measurements – Part 1: Principles for determining the dimensions required for openings for whole body access into machinery C 22 (2009-01-28);C 214 (2009-09-08)
EN 547-2:1996 + A1:2008 Safety of machinery – Human body measurements – Part 2: Principles for determining the dimensions required for access openings C 22 (2009-01-28);C 214 (2009-09-08)
EN 547-3:1996 + A1:2008 Safety of machinery – Human body measurements – Part 3: Anthropometric data C 22 (2009-01-28);C 214 (2009-09-08)
EN 614-1:2006 + A1:2009 Safety of machinery – Ergonomic design principles – Part 1: Terminology and general principles C 214 (2009-09-08
EN 614-2:2000 + A1:2008 Safety of machinery – Ergonomic design principles – Part 2: Interactions between the design of machinery and work tasks C 214 (2009-09-08)
EN 842:1996 + A1:2008 Safety of machinery – Visual danger signals – General requirements, design and testing C 22 (2009-01-28);C 214 (2009-09-08)
EN 894-1:1997 + A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 1: General principles for human interactions with displays and control actuators C 74 (2009-03-28);C 214 (2009-09-08)
EN 894-2:1997 + A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 2: Displays C 74 (2009-03-28);C 214 (2009-09-08)
EN 894-3:2000 + A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 3: Control actuators C 74 (2009-03-28);C 214 (2009-09-08)
EN 894-4:2012 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 4: Location and arrangement of displays and control actuators C 284 (2010-10-20)
EN 981:1996 + A1:2008 Safety of machinery – System of auditory and visual danger and information signals C 22 (2009-01-28);C 214 (2009-09-08)
EN ISO 13732-1:2008 Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces – Part 1: Hot surfaces (ISO 13732-1:2006) C 22 (2009-01-28);C 214 (2009-09-08)
EN ISO 13732-3:2008 Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces – Part 3: Cold surfaces (ISO 13732-3:2005) C 22 (2009-01-28);C 214 (2009-09-08)
EN ISO 14738:2008 Safety of machinery – Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) C 22 (2009-01-28);C 214 (2009-09-08)
EN ISO 15536-1:2008 Ergonomics – Computer manikins and body templates – Part 1: General requirements (ISO 15536-1:2005) C 22 (2009-01-28);C 214 (2009-09-08)
EN ISO 7731:2008 Ergonomics – Danger signals for public and work areas – Auditory danger signals (ISO 7731:2003) C 22 (2009-01-28);C 214 (2009-09-08)

CEN/TC 122- Candidate harmonised standards under development

Project reference Title Candidate Citation Current status DAV
00122139 EN ISO 7250-1 Basic human body measurements for technological design – Part 1: Body measurement definitions and landmarks (ISO 7250-1:2008) ? ? ?

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s